WBU G | Water-Based Urethane Concrete Coating - Gloss (3 QT)

Walttools WBU-G is a water-based, two-component, chemical resistant, self-cross-linking polyurethane coating. The high-gloss finish offers excellent abrasion, chemical, and stain resistance, along with superior color retention. It is ideal for concrete floors and walls in garages, restaurants, warehouses, storage facilities, aircraft hangars, animal clinics, and vehicle service centers. WBU can be pigmented. This is often used as a hardy topcoat for coatings like Walttools Epoxy HP. Walttools WBU works well on both vertical or horizontal surfaces. UV-resistant. Superb abrasion, chemical, and stain resistance. Suitable for both exterior and interior surfaces. Apply by spray, roll, or microfiber applicator. VOC compliant and low odor. Excellent elasticity and elongation properties. Early water resistance. Also available in low gloss. 2:1 mix ratio (2 part A : 1 part B). 3 Gal kit. Coverage approx. 350 sq ft per gallon. Containers in this kit may not be completely full and can often be used as the mixing container for your project. Professional use only.

• Water-based, two-component, chemical resistant, self cross linking polyurethane coating.
• Coverage approx 350 sq ft per gallon. Apply by spray, roll, or microfiber applicator.
• VOC compliant and low odor; 40% solids. Superb abrasion, chemical, and stain resistance.
• It is ideal for concrete floors and walls in garages, restaurants, warehouses, storage facilities, aircraft hangars, animal clinics, and vehicle service centers where you are looking for a non intrusive look that hides long term wear.
• WBU can be pigmented. This is often used as a hardy topcoat for coatings such as Walttools Epoxy HP. Walttools WBU can be used equally well on vertical or horizontal surfaces.