AIZYR 20/30/40 Plates Heat Exchanger Wort Chiller, Stainless Steel Beer Wort Chiller Cooler with Copper Homebrew Beer Cooler Tools,30 Plates

20 Plates Chiller: Dimension: 190mm x 72mm x 65mm Garden hose thread : 1/2" Male NPT fitting30 Plates Chiller: Dimension: 190mm x 72mm x 87mm Garden hose thread : 3/4" Male NPT fitting 40 Plates Chiller:Dimension: 190mm x 72mm x 112mmWater side out/in: 3/4" NPT Theaded Wort side out/in: 1/2" NPT ThreadedFeature:The wort chilling rate is depending on tap water temperature and rate of flow.Low temperature, faster cooling rateHigh flow rate, faster cooling ratePrinciple: Counterflow chillers are a tube-inside-a-tube design and work by running hot wort from the boil kettle through the inner tube while cold water flows in the opposite direction through the outer tube.OPERATION TIPS1. Soak the wort side in a suitable cleaning solution2. Rinse with water, after filling it with cleaning solution, tip it from side to side to make sure air bubbles escape3. Let dry after it has been flushed4. Connect wort-in port to the mash tun5. Connect wort-out port to your fermenter6. Connect water-in port to garden hose getting cool water7. Connect water-out port to garden hose to remove warm water8. Turn on the cooling water first and then open the valve on your pot to start the wort flow9. Flush the wort side of the chiller with plenty of clean water immediately after use10. To remove deposits, soak in a suitable cleaner for 4 hours and then flushPacakge Includes: 1Pc wort chiller

• Quickly Chilling Beer/ Wort: Compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20/30/40 brazed plates and cools wort within minutes rather than several hours
• High Thermal Efficiency: Turbulent-flow design moves the two media in opposite directions and creates strong turbulence for superior heat transfer rates and efficiency.
• Great Upgrade: Chiller connection ports are all 1/2" male NPT quick disconnect fittings. It has a tremendously low restriction, which makes it ideal for working with a pump to do gravity transferring.
• No Leaks & Rust-free: Wort chiller's plates and fittings are made of 304 stainless steel and have been brazed together with pure copper in an oxygen-free furnace, there is no potential for leaks and rust.
• Compact Design: Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings.