60 inches Soda Machine Adapter Hose Kit, CGA320 to New SodaStream Maker for Terra, Duo, Gaia, Crystal3.0, Co2 Tank Cylinder Hose Kit with New Snap-on Direct Connector

Product Packaging: 1 * 60Inch stainless steel braided hose 1 * Gasket accessory kit 1 * user's Guide Specifications: Hose length: 60Inch / 1.5m Working pressure: 4800 PSI SodaStream Model Requirement: This Soda Machine Adapter Hose Kit goes to a SodaStream model that's a newer style that doesn't have a TR21-4. It only goes to the newer style locking sleeve style connector on the newer SodaStreams. So please Make sure yours is the gold locking sleeve type SodaStream. Tips: Please close the tank every time after making soda water, just like we use natural gas for cooking, so as to ensure that the gas in the tank will not leak! If you meet below problem: The valve allow CO2 to come out the side holes inside the soda machine seal, this is blowing CO2 rapidly out of the top. -Solution: Please press the middle small circle dot of the gold adapter few times to reset the rubber ring, since the rubber ring inside is misaligned.

• This adapter works with GAS CO2 only, not liquid CO2. liquid CO2 will create a bad taste in your drink.It can't use siphon tube Co2.
• This adapter can not work with RPV-value(residual pressure value), please check your CO2 value before purchase. Note: Not suit for Old TR21-4 Soda Maker, only for New Soda Maker - Like: TERRA, DUO, GAIA, Crystal3.0.
• High pressure hose has a length of 60 inches, Can be applied to most scenarios, This external hose connect a large CO2 tank and machine, Suitable for standard CGA-320 CO2 gas tank, Please check the interface type before buying.Working pressure meets 4500 psi.
• About Air Tightness: The hose comes with two cushion ring, please use it during installation to prevent air leakage.
• Please don't disconnect the quick disconnect under pressure, it will be blowed out the o ring in quick disconnect(female QD),suggest drain residual pressure on Machines.